Your LAN subnet conflicts with the WAN one. This gets us to the next problem on the DD-WRT router. Either set your DD-WRT WAN Connection type to 'automatic configuration - DHCP' so it can get the DNS from the modem automatically, or set a DNS server manually under Setup > Basic Setup > Network Setup > Local DNS. Now, from what I can see your DD-WRT WAN settings have no DNS server specified. Then why keep DHCP server enabled? Anyway, this is not such a big deal. Maybe you want the router to always have the same IP on the modem - router LAN, not like it would matter, but fine. Set the Encryption Cipher to Blowfish CBC.I identified several problems from your screenshot.įirst of all your LAN settings on the modem use 192.168.1.1 and have DHCP enabled, but your DD-WRT uses Static IP.(We suggest you to use UDP for better speed) Set the Tunnel Protocol to TCP or UDP.For TCP/UDP protocol you may enter one of the following port number 53, 80, 443 or 1194. Enter VPN Server Address to Server IP/Name.Click on „Security” then „Firewall” and set „SPI Firewall” to „Disable” and click „Apply settings” button to save.ħ. Set „Start OpenVPN Client” to „Enable”. Uncheck all three checkboxes for „Use DNSMasq for DHCP”, „Use DNSMasq for DNS” and „DHCP-Authoritative” and enter 208.67.222.222 and 208.67.220.220, 8.8.8.8 and 8.8.4.4 into „Static DNS 1”, „Static DNS 2”, „Static DNS 3”, „Static DNS 4” textbox as seen on the screenshot. Builds or versions other than v24-sp2 (12/22/14) may have bugs preventing OpenVPN connections.Ģ. Software version that has been tested to work on VPN servers is DD-WRT newer build. Open a web browser, and load the following address: Note, set your network connection to obtain IP address automatically if you connect to your router via Ethernet.Ĭheck your DD-WRT firmware. Connect to the DD-WRT router using either an Ethernet cable or by joining the wireless network ‘dd-wrt’.

Dd wrt v24 sp2 download